The Speedy Surface Prep Towel takes paint decontamination to a whole new level by applying 21st century technology to it. The towel makes paint decontamination easier than ever! The Speedy Surface Prep Towel is essentially a microfiber towel with a high-tech polymerized rubber coating applied to one side. This polymerized rubber coating grabs above surface contaminants and pulls them away from the surface, leaving you with contaminant-free paint.
A traditional detailing clay bar will yield 10-20 uses, depending on how contaminated the surface is. The Speedy Surface Prep towel will provide up to 100 applications, making it far more cost effective in the long run when compared to traditional detailing clay bars. What if you drop the Speedy Surface Prep Towel on the ground? Don't toss it like you would a clay bar! Simply rinse it off with water and it's ready for action once again.
1. The Speedy Surface Prep Towel comes with a protective coating from the factory. Before using the towel, you must break it in. Saturate the towel with a clay lubricant and using no pressure, wipe the towel back and forth and then up and down on clean, lubricated glass, such as your windshield. After several passes, the protective coating will be removed and the Speedy Surface Prep Towel will be ready for use.
2. Fold the Speedy Surface Prep Towel four ways and work one panel at a time using a high quality clay lubricant such as SHOWROOM SHINE or WATER WAX. Spray the area and without applying any pressure, move the towel back and forth in one direction and then up and down in the other direction. Make sure that you are using a fast hand motion. Do not move the Speedy Surface Prep Towel in circles or go outside of your lubricated area.3. After the Speedy Surface Prep Towel glides smoothly across the surface, flip it to another side and lightly go over the area once more.
4. Remove any excess lubricant and move on to the next section.Note: If you drop the Speedy Surface Prep Towel on the ground, simply rinse it with water. Do not use harsh detergents to clean the Speedy Surface Prep Towel. A mild soap and water solution is all that's needed.